This site uses cookies. Please click here to see our cookie policy.
-37% Nice RobusKit 400 24Vdc gate motor kit for a sliding gate up to 400Kg

For sliding gates weighing up to 400kg

The Nice Robus Kit Contains:

  • 1 x RB400 irreversible electromechanical gear gate motor with an incorporated control unit and inductive limit switch. 
  • 2 x ON2E transmitter 433.92MHz, 2 channels. 
  • 1 x OXI receiver up to 4 channel receiver with the connector without built-in transmitter.
  • 1 x pair of EPMB external photocells designed for connection by Nice BlueBUS.

User-friendly: The Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates
set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light.
8 programming levels.
safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
sturdy: base and release in pressure die cast aluminium and epoxy paint finish.
Very quiet: gear motor on bearings.

Nice RobusKit 400 installation diagram

IP Rating44
Max Gate Weight400Kg
Max Speed34cm/sec
Motor Voltage24Vdc
Solar Power OptionYes
Work Cycle35

Write a review

Please login or register to review

Nice RobusKit 400 24Vdc gate motor kit for a sliding gate up to 400Kg

  • £873.13
  • £551.00 +VAT
  • £661.20 Inc VAT
. . .