Wireless Single Button Access Control Audio Intercom System For Automatic Electric Gates From AES
D.E.C.T - Digital Enhanced Cordless Telecommunications
603-AB DECT Intercom Unit
This Architectural model is a highly stylish unit with curved edges and neon blue back-lighting.
The central panel is a toughened gloss black acrylic trim over a brushed stainless steel (BS316) marine grade body.
603-AB DECT Kit
The kit includes the speech panel with power supply and transmitter module.
Three metres of screened CAT5 cable is supplied for connecting the speech unit and transmitter.
A maximum run of 8m for the CAT5 cable is recommended although keeping this as short as possible is advised.
Using highly reliable DECT digital communications the transmitter communicates with the handsets up to 350m to 400m away with clear line of sight or up to 200m through an external house wall.
It comes with one handset with charging base and charger although each system will support up to 4 wireless handsets. Additional handsets are available individually.
Full instructions for installing the 603 DECT system are also included.
Simple installation and system set-up
603-AB DECT Handsets
The handsets are very easy to use and feature an Answer and End Call button.
The Release button can be used to operate automatic gates when there is no active call by pressing and holding the Release button.
Missed visitors can leave voicemail messages that can be picked up on the handsets.
Internal calls can also be made between handsets.
For hearing impaired customers, the handsets incorporate a flashing strobe activation indicator.
The illuminated LED screen shows the reception strength indicator and voicemail message indicator.
Each handset uses AAA Ni-mH rechargeable batteries.
Handset battery life between charges is 24 hours.
603-ABK DECT Warranty
The AES 603 DECT wireless intercom system is supplied with a two year manufacturer's warranty.
603 DECT Options
Range extending antenna
603-ABK DECT Specifications
• 12dc power supply
• CAT5 alarm power cable friendly
• Current consumption 50mA standby
• Current consumption 250mA calling
• N/O and N/C relays
• Relay time fixed 4 seconds
• Relay load 2A, 24Vac max.
• 1.88GHz digital DECT system
• Cable cores 2 x SPK, 2 x MIC, s x power, 2 x button
• Speech unit IP55
• Transmitter unit IP65
• Call unit dimensions H 192mm x W 144mm x D 40mm