-
Your shopping cart is empty!
MENU
Your shopping cart is empty!
Swing gate automation kits use either articulated arm, ram or underground gate motors.Click to select the most appropriate gate kits for your job based on the criteria below.
| Needs room for the arm as the gate opens | Need very little space to operate in | Do not need a lot of space to operate and can open gates to 180 degrees with optional chain drive |
| Easier to install | Require careful alignment | Require careful installation with drainage |
| Slightly more expensive | Most cost-effective gate automation | Normally the most costly solution |
| More obvious when installed | Slimline | Almost invisible |
| Quicker to operate | Can open larger gates with leaves up to 7m | Versions available to open leaves up to 5m |
| Can normally be manually released from outside the gate with optional cable release | Can only be manually released from inside the gate | Can be manually released from outside the gate |
| More easily installed on large piers with gates hung away from the rear face | Require a shorter distance between motor mounting and gate hinges on pillars | Require a carefully positioned hole for foundation box and drainage |
| Electromechanical | Can be hydraulic | Can be hydraulic |
| Many models with built-in controls making for a compact installation | Separate control box | Separate control box |
| 230Vac and 24Vdc versions with obstacle detection for safer operation | 230Vac and 24Vdc versions with obstacle detection for safer operation | 230Vac and 24Vdc versions with obstacle detection for safer operation |
| Good option for new installers | Cost-effective soloution for more experienced installers | Need experience to install underground motors |
